22
EN
1x
WT
01x
WT
01x
WT
02x
WT
04x
WT
Zoom in (T: Telephoto)
Zoom out (W: Wide angle)
Power Zoom Lever
Zoom display
Approximate zoom ratio
Digital zoom zone
10X (optical) zoom zone
Power Switch
MENU Wheel
BASIC RECORDING
Recording On Tape And Memory Card
FEATURE:
Zooming
PURPOSE:
To produce the zoom in/out effect, or an instanta-
neous change in image magnification.
OPERATION:
Zoom In
Slide the Power Zoom Lever towards “T”.
Zoom Out
Slide the Power Zoom Lever towards “W”.
䡲 The further you slide the Power Zoom Lever, the
quicker the zoom action.
NOTES:
● Focusing may become unstable during Zooming. In
this case, set the zoom while in Record-Standby,
lock the focus by using the manual focus
(
墌 pg. 24), then zoom in or out in Record mode.
● Zooming is possible to a maximum of 300X, or it
can be switched to 10X magnification using the
optical zoom (
墌 pg. 29).
● Zoom magnification of over 10X is done through
Digital image processing, and is therefore called
Digital Zoom.
● During Digital zoom, the quality of image may suffer.
● Digital zoom cannot be used when the VIDEO/
MEMORY Switch is set to “MEMORY” (
墌 pg. 14).
● Macro shooting (as close as approx. 5 cm to the
subject) is possible when the Power Zoom Lever is
set all the way to “W”. Also see “TELE MACRO” in
the Menu Screen on page 30.
To Next Page
Loading...
Need help?
General
