50
EN
DELETE
M
E
NU
RENT
ALL
RETURN
CUR
ELETED
EXECUTE
DELETE?
RETURN
Deleting Files
Previously stored files can be deleted either one at a
time or all at once.
1 Load a memory card (墌 pg. 13).
2 Set the VIDEO/MEMORY Switch to “MEMORY”,
then set the Power Switch to “ ” while pressing
down the Lock Button located on the switch.
• A stored file is displayed.
If you want to select another type of file
. . . go to step 3.
If not . . . go to step 4.
3 Press SELECT. The MEMORY SELECT Screen
appears. Rotate the MENU wheel to select the type of
file: IMAGE, E-MAIL CLIP (墌 pg. 46), SOUND
(墌 pg. 45) or TITLE (墌 pg. 48). Then press the
MENU wheel in. The selected type of file is displayed.
4 Press the MENU wheel in. The Menu Screen
appears. Rotate the MENU wheel to select
“DELETE”, then press it.
5 Rotate the MENU wheel to select the desired
mode.
CURRENT : Deletes the currently displayed file.
ALL : Deletes all files stored on the memory
card.
6 Press the MENU wheel in. The DELETE Screen
appears.
• If you selected “CURRENT” in step 5, press
2
or
3
to select the desired file.
7 Rotate the MENU wheel to select “EXECUTE”
and press it.
• If the “ ” mark appears, the selected file is
protected and cannot be deleted (墌 pg. 49).
• To cancel deletion, select “RETURN”.
NOTES:
● Protected files (墌 pg. 49) cannot be deleted with the
above operation. To delete them, remove protection
first.
● Once files are deleted, they cannot be restored. Check
files before deleting.
Power Switch
MENU Wheel
Display
DELETE Screen
CAUTION
Do not remove the memory card or perform any other
operation (such as turning off the camcorder) during
deletion. Also, be sure to use the provided AC Power
Adapter/Charger, as the memory card may be
corrupted if the battery becomes exhausted during
deletion. If the memory card becomes corrupted,
initialise it. (墌 pg. 51)
Lock Button
SELECT Button
VIDEO/MEMORY Switch
(Open the LCD monitor
to access this switch.)
ADVANCED FEATURES
(cont.)
Menu Screen
To Next Page
Loading...
Need help?
General
