EN
65
OF
1
2
3
4
F
CLASS I C
MONOTONE
SEP I A
STROBE
PLAYBACK TEFFEC
FILM
PLAY
EFFECT ON/OFF
EFFECT
PLAYBACK EFFECT
Select Menu
FEATURE:
Playback Special Effects
PURPOSE:
To allow you to add creative effects to the tape
playback image.
OPERATION:
1) To start playback, press PLAY (
4
).
2) Point the remote control at the camcorder's
remote sensor and press EFFECT. The
PLAYBACK EFFECT Select Menu appears.
3) Move the highlight bar to the desired effect by
pressing EFFECT. The selected function is
activated and after 2 seconds the menu
disappears.
To deactivate the selected effect, press EFFECT
ON/OFF on the remote control. Pressing it again
re-activates the selected effect.
To change the selected effect, repeat from step
2 above.
NOTE:
The effects that can be used during playback are
Classic Film, Monotone, Sepia and Strobe. The
effects work the same in playback as they did in
recording. Refer to page 39 for more information.
Remote sensor
To Next Page
Loading...
Need help?
General
