52
EN
DPOF
M
E
NU
RENT
ALL 1
RESET
RETURN
CUR
DPOF
EXECUTE
ALL1?
RETURN
Setting Print Information (DPOF Setting)
This camcorder is compatible with the DPOF (Digital
Print Order Format) standard in order to support
future systems such as automatic printing, which
records information about the still images you wish to
print (such as the number of prints to make). There
are 2 print information settings available: “To print all
still images (one print for each)” explained below and
“To print by selecting still images and no. of prints”
(墌 pg. 53).
TO PRINT ALL STILL IMAGES
(ONE PRINT FOR EACH)
1 Set the VIDEO/MEMORY switch to “MEMORY”,
then set the Power Switch to “ ”, while pressing
down the Lock Button located on the switch. Open the
LCD monitor fully or pull out the viewfinder fully.
• A stored file is displayed.
2 Make sure an IMAGE file is displayed (墌 pg. 26);
if not, press SELECT to access the MEMORY
SELECT Screen. Rotate the MENU wheel to select
“IMAGE” and press it.
3 Press the MENU wheel in. The Menu Screen
appears.
4 Rotate the MENU wheel to select “DPOF” and
press it. The Sub Menu appears.
5 Rotate the MENU wheel to select “ALL 1” and
press it. Selection is complete. The DPOF Screen
appears.
6 Rotate the MENU wheel to select “EXECUTE”
and press it. The normal playback screen appears.
• To cancel selection, rotate the MENU wheel to
select “RETURN” and press it.
To Reset The Setting . . .
..... select “RESET” in step 5. The setting is reset to 0
for all still images.
MENU Wheel
Menu Screen
Display
SELECT Button
DPOF Screen
Power Switch
Lock Button
VIDEO/MEMORY Switch
(Open the LCD monitor
to access this switch.)
ADVANCED FEATURES
(cont.)
To Next Page
Loading...
Need help?
General
