JVC GR-DVL9000 User Manual

18 EN
GETTING STARTED (Cont.)
TW
Remote Control Unit
You can use the RM-V711U to control the camcorder. When using the remote control, be sure to point it at
the remote sensor. The transmitted beam effective area for indoor use is approx. 5 m. The transmitted beam
may not be effective or may cause incorrect operation if the remote sensor is directly exposed to sunlight or
powerful lighting.
Installing The Battery
The RM-V711U uses one lithium battery (CR2025).
1
PULL OUT BATTERY HOLDER
Pull out in the direction of the arrow while
pressing the knob as shown.
2
INSERT BATTERY IN HOLDER
Insert the battery in the holder, and be sure to
have the “+” mark visible.
3
RE-INSERT HOLDER
Slide the holder back in until you hear a click.
•Read the caution concerning lithium batteries
(Z pg. 2).
Operation Buttons
(
Z pg. 54, 62, 70, 71)
Up Button (Z pg. 54)
INSERT Button (
Z pg. 71)
Down Button (
Z pg. 54)
AUDIO MONITOR Button
(Z pg. 70)
MBR SET Button (Z pg. 64)
A. DUB Button (Z pg. 70)
START/STOP Button (Z pg. 71)
PAUSE IN connector (Z pg. 65)
EFFECT ON/OFF Button
(Z pg. 55)
EFFECT Button
(Z pg. 55)
FADE/WIPE Button
(Z pg. 66)
Left/Right Buttons
(Z pg. 54)
SLOW Rewind/Forward
Buttons (Z pg. 53)
SHIFT Button (
Z pg. 54, 64)
DISPLAY Button (Z pg. 62)
Zoom Buttons (
Z pg. 54)
Knob
R.A. EDIT Buttons (Z pg. 67)

JVC GR-DVL9000 Specifications

General

Brand	JVC
Model	GR-DVL9000
Category	Camcorder
Language	English