56 EN
PLAYBACK
Advanced Features (Cont.)
SOUND1
0 . 0
ON
OFF
ON
OFF
ON
OFF
FULL SOUND
SOUND2
SOUND1
FULL SOUND
48kHz MODE
32kHz MODE
DISPLAY
TIMECODE
SYNCHRO
END
4
SOUND1
0 . 0
ON
OFF
FULL SOUND48kHz MODE
32kHz MODE
DISPLAY
TIMECODE
SYNCHRO
END
4
A
M
5S
OFF
P
L
A
Y
Playback Menu
The Playback Menu allows you to set the following functions:
Playback Sound (32 kHz, 48 kHz), Synchro Comp, Display
and
Time Code
. The following procedure applies
to all except
Synchro Comp
(Z pg. 68, 69).
4
SET FUNCTION PARAMETERS
Rotate the Select Dial to cycle through the
available settings for the selected function, and
stop when the desired setting appears. Then
press the Select Dial, and the pointer and
highlight bar automatically move to “END”.
•To set parameters for other functions, repeat
steps 3 and 4.
5
CLOSE MENU
Press the Select Dial again, and the menu
disappears.
1
SELECT OPERATION MODE
First turn the Power Dial to “PLAY” while
pressing down the lock button located on the
dial. Open the LCD monitor fully.
2
ACCESS PLAYBACK MENU
Press MENU. The Playback Menu appears in
the LCD monitor and on the connected TV.
3
SELECT FUNCTION
Move the pointer and highlight bar to the
desired function by rotating the Select Dial.
Press the Select Dial to activate.
Playback Menu
Display
Power Dial
Lock button
Select Dial
MENU button
To Next Page
Loading...
Need help?
General
