31
Preparation: Set to the video shooting or still picture shooting
mode.
䡵 Setting to the Manual Focus mode
Press AF/MF to display the Manual Focus icon (MF).
1 . Set the [FOCUS/ZOOM] ring switch to FOCUS.
Doing so enables you to use the manual ring of the lens
as a focus ring.
2 . Turn the manual ring to adjust the focus.
Using the Focus Assist function on the right helps to
enable easy focusing.
Using the Focus Assist Function
This feature temporarily switches the screen to black-and-
white, and adds color to the contour of the focused image.
䡵 There are two ways to activate the Focus Assist function.
A Set [FOCUS ASSIST] in the [CAMERA PROCESS] menu
to [ON]. (A Page 59)
Or
B Set [USER1], [USER2], or [USER3] in the [CAMERA
SETTINGS] menu to the Focus Assist function, then
press the corresponding USER button. (A Page 21, 65)
Turn the manual ring to add color to where you want to
focus.
䡵 Canceling Focus Assist
Set the [FOCUS ASSIST] menu to [OFF].
Or
Press the USER button that is assigned the Focus Assist
function.
Memo :
● To change the contour color, use the [FOCUS ASSIST
COLOR] setting in the [CAMERA PROCESS] menu.
(BLUE, GREEN, RED)
When using the Focus Assist function at a dark place, the
point where color is added may appear grainy, making the
contour color unclear.
● When [DISPLAY ON TV] in the [CONNECTION
SETTINGS] menu is set to [ON], the Focus Assist display
is output on the external monitor. Set [DISPLAY ON TV] to
[OFF] to clear the display on external monitors.
Adjusting the Focus
Manually
AF/MF
00:00:00:01
18dB
ND
[
0h57m
]
[
5h12m
]
A
B
Manual Focus Mode
Ring switch set to FOCUS
Manual Ring
AF/MF
Focus Assist enabled
Color added
M9H7_EN_001D.book Page 31 Thursday, August 26, 2010 11:51 AM
To Next Page
Loading...
Need help?
General
