[] To detach the battery pack
Slide and hold BATT. ( " step 2), then
remove the battery pack.
[] To check the remaining battery power
See page 14.
® You can also use the camera with just the AC
adapter.
® Please do not pull or bend the AC adapter plug
and cable. This may damage the AC adapter.
The language on the display can be changed.
] Set the power/mode switch to ON,
Slide while pressing down the lock button.
6 Setect the desired language.
Select
Set
[] To return to the previous screen
Move the set lever to <.
[] To exit the screen
Press MENU.
After performing steps 1-4 (.u left column)
5 Select [CLOCK ADJUST].
Select
2
MENU
3
4 Select [GENERAL].
Select
Set
Select [LANGUAGE].
Select
Set
Set
Set the date and time.
Select
Set
Repeat this step to input the month, day,
year, hour and m nute.
[] To return to the previous screen
Move the set lever to <.
[] To exit the screen
Press MENU,
You have now finished configuring the
necessary sett rigs.
Im To use the camera right away
:Seepage16.
ml To Configure other settings
See page 14:
13
To Next Page
Need help?
General
