Watching images on TV
Preparation:
• [GZ-MG255/155] Make sure that [ANALOG INPUT] is set to [OFF]. (Factory-preset = [OFF])
(_" pg. 49)
®Turn off all units.
AV Connector
AV Cable
DC Connector
AC Adapter AV Input Connector
To AC Outlet
• [GZ=MG255/155]Youcan also connect the cables using the Everio dock connectors. The S-Video cable
(optional) enables even higher quality playback. (J- pg. 6) When other devices such as a DVD burner
are connected to the Everio dock, switch off these devices power.
® This camera is designed to be used with NTSC-type color television signals. It cannot be used with a
television of a different standard.
] Turn on the camera and theTV.
2 Set theTV to itsVIDEO mode.
3 (Only when connecting the camera to the VCR/DVD recorder)
Turn on the VCR/DVD recorder, and set the VCR/DVD recorder to its AUX input
mode.
4 Start playback on the camera. (_:_pg. 24, 25)
16:9TV
[] if the aspect ratio of the image is not correct ....
as shown right
Change the settings in [SELECT TV TYPE].
(_ pg. 49)
[] To display camera's on-screen display on TV
Set [DISPLAY ON TV] to [ON]. (_ pg. 49)
4:3TV
29
To Next Page
Loading...
Need help?
General
