JVC KD-AVX44 - DVD Player With LCD monitor User Manual

OPERATIONS
23
ENGLISH
Disc Surround
AV Menu
Enter
Auto
Disc Surround
Surround Off
Surround On
To turn on the surround
1
2
3
Surround Off:
Deactivates surround.
Surround On:
Activates surround. = Go to the following step.
4
Auto:
• When multi-channel digital signals come in,
“MULTI” surround is activated.
• When 2-channel or 2.1-channel signals
*5
come
in, “4CH STEREO” is activated.
Through:
All incoming channel signals are sent to the
corresponding speakers.
Dolby PLII Movie:
Activates Dolby Pro Logic II Movie.
Dolby PLII Music:
Activates Dolby Pro Logic II Music. You can adjust
<Panorama> and <Center Width> settings. (☞
right column)
*
5
Except signals of DivX/MPEG1/MPEG2 discs.
Surround On
Exit
Auto
Through
Dolby PLII Movie
Dolby PLII Music
To change the <Dolby PLII Music> setting
In step 4 in the left column...
1 Select <Dolby PLII Music>.
2 Enter each sub-screen then select the desired
setting.
EX.: When <Panorama> is selected in step 1.
Panorama:
Select <On> to add wraparound sound effect.
Center Width:
Adjust the center image so it may be heard only
from the center speaker, only from the left/right
front speaker as a “phantom” center image, or
various combination of these speakers.
As the number increases, the “phantom” effect
becomes stronger (normally select <04>).
3
On the remote:
• You cannot change the <Dolby PL II Music> settings
using the remote controller.
Off
Dolby PLII Music
Panorama
Center Width
Panorama
Exit
Off
On
Surround On
Auto
Through
Dolby PLII Movie
Dolby PLII Music
EN_KD-ADV49AVX44[JC]ff.indb 23EN_KD-ADV49AVX44[JC]ff.indb 23 08.1.18 8:10:02 PM08.1.18 8:10:02 PM

JVC KD-AVX44 - DVD Player With LCD monitor Specifications

General

Brand	JVC
Model	KD-AVX44 - DVD Player With LCD monitor
Category	Car Receiver
Language	English