ENGLISH
56
Menu items Selectable settings, [reference page]
Settings
Auto Connect When the unit is turned on, the connection is established automatically
with...
Off: No Bluetooth device.
Last: The last connected Bluetooth device.
Auto Answer Off: The unit does not answer the calls automatically. Answer the calls
manually.
On: The unit answers the incoming calls automatically.
Reject: The unit refuses all incoming calls.
SMS Notify On: The unit informs you of the arrival of a message by ringing and
displaying “Receiving Message.”
Off: The unit does not inform you of the arrival of a message.
Add Phonebook Copy the phone book memory of a cellular phone into the unit. You can
register up to 50 phone numbers, ☞ [35]
MIC Setting Adjust the built-in microphone volume.
01, 02, 03
Phone Volume Adjust the phone volume.
00 to 30 or 50
*1
, Initial 15
Initialize
Initialize all settings you have made in <Bluetooth>.
Yes: Initializes the settings.
No: Cancels.
Information The following information is shown:
Name: The unit name
Address: The Mac address of the unit
Version: The Bluetooth software/hardware versions
*2
Phone Device/Audio Device: The connected device names
*
1
Depends on the amplifier gain control. (☞ page 53)
*
2
If you wish to receive more information about Bluetooth, visit the following JVC web site:
<http://www.jvc-victor.co.jp/english/car/>
When operating the Bluetooth device, refer also to the instructions supplied with the device.
EN_KD-AVX44[UT]1.indb 56EN_KD-AVX44[UT]1.indb 56 08.1.25 9:57:27 AM08.1.25 9:57:27 AM
To Next Page
Loading...
Need help?
General
