JVC KW-AVX730 User Manual

44
ENGLISH
Menu item Selectable setting/item
Initial: Underlined
Settings
Ring Mode
♦
In Unit
♦
In Phone
: Selects the ring tone set on the unit.
: Selects the ring tone set on the mobile phone. (This
function may not work depending on the mobile
phone.)
Ring Tone Change When <Ring Mode> is set to <In Unit>, you can select the ring tone for
received calls and SMS from Tone1, Tone2, Tone3.
♦
Call Tone
♦
Message Tone
: Selects the ring tone for phone calls.
: Selects the ring tone for SMS.
Initialize Hold [Enter] to initialize all settings you have made in <Bluetooth>
menu.
Information The following information is shown:
♦
Name
♦
Address
♦
Version
♦
Phone Device/
Audio Device
: The unit name
: The Mac address of the unit
: The Bluetooth software
: The connected device names
Bluetooth operations for KW-AVX730
For Bluetooth operations, it is required to connect the
Bluetooth Adapter (KS-BTA200: separately purchased)
to the expansion port on the rear.
• Refer also to the instructions supplied with the
Bluetooth Adapter and the Bluetooth device.
• Refer to pages iii and iv at the end of manual to
check the countries where may use the Bluetooth®
function.
To use a Bluetooth device through the unit (“ BT
Phone ” and “ BT Audio ”) for the first time, you need
to establish Bluetooth wireless connection between
the unit and the device.
• Once the connection is established, it is registered in
the unit even if you reset your unit. Up to 5 devices
can be registered in total.
• Only one device can be connected at a time for each
source (“ BT Phone ” and “ BT Audio ”).
Connecting Bluetooth devices
Connecting a new Bluetooth
device
Registration (Pairing) methods
Use either of the following items in <Bluetooth>
menu to register and establish the connection with a
device.
• Select “ BT Phone ” or “ BT Audio ” as the source to
operate <Bluetooth> menu. ( 10)
Open Make the unit ready to establish a new
Bluetooth connection. The connection
is established by operating the
Bluetooth device.
Search Make the unit ready to establish a new
Bluetooth connection. The connection
is established by operating this unit.
KW-AVX730
EN_KW-AVX830[E].indb 44EN_KW-AVX830[E].indb 44 10.1.19 3:09:43 PM10.1.19 3:09:43 PM

JVC KW-AVX730 Specifications

General

Brand	JVC
Model	KW-AVX730
Category	Car Receiver
Language	English