EasyManuals Logo

JVC KW-AVX730 User Manual

JVC KW-AVX730
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
58
ENGLISH
More about this unit
This unit may not play back files in a USB device
properly when using a USB extension cord.
This unit cannot assure proper functions or supply
power to all types of the devices.
This unit can recognize a total of 5 000 files and 250
folders (a maximum of 999 files per folder).
This unit can recognize a total of 25 characters for
file/folder names.
For MPEG1/MPEG2 files: The maximum bit rate for
video signals (average) is 2 Mbps.
File playback
Playing DivX files (for discs only)
This unit can play back DivX files with the extension
code <.divx>, <.div>, or <.avi> (regardless of the
letter case—upper/lower).
Audio stream should conform to MP3 or Dolby Digital.
The file encoded in the interlaced scanning mode
may not be played back correctly.
The maximum bit rate for video signals (average) is
4 Mbps.
Playing MPEG1/MPEG2 files
This unit can play back MPEG1/MPEG2 files with the
extension code <.mpg>, <.mpeg>, or <.mod>*.
* <.mod> is an extension code used for the MPEG2
files recorded by JVC Everio camcorders. The MPEG2
files with the <.mod> extension code cannot be
played back when stored on a USB mass storage
class device.
The stream format should conform to MPEG system/
program stream.
The file format should be MP@ML (Main Profile at
Main Level)/SP@ML (Simple Profile at Main Level)/
MP@LL (Main Profile at Low Level).
Audio streams should conform to MPEG1 Audio
Layer-2 or Dolby Digital.
The maximum bit rate for video signals (average) is
4 Mbps.
Disc
General
This unit can only play back audio CD (CD-DA) files
if different type of audio files (MP3/WMA/WAV) are
recorded on the same disc.
Playing Recordable/Rewritable discs
This unit can recognize a total of 5 000 files and 250
folders (a maximum of 999 files per folder).
Use only “finalized” discs.
This unit can play back multi-session discs; however,
unclosed sessions will be skipped while playing.
This unit can recognize a total of 25 characters for
file/folder names.
Some discs or files may not be played back due to
their characteristics or recording conditions.
USB
This unit cannot recognize a USB device whose rating
is other than 5 V and exceeds 500 mA.
While playing from a USB device, the playback order
may differ from other players.
This unit may be unable to play back some USB
devices or some files due to their characteristics or
recording conditions.
USB devices equipped with special functions such as
data security functions cannot be used with the unit.
Do not use a USB device with 2 or more partitions.
Depending on the shape of the USB devices and
connection ports, some USB devices may not be
attached properly or the connection might be loose.
When connecting a USB device, refer also to its
instructions.
Connect only one USB device to the unit at a time. Do
not use a USB hub.
This unit may not recognize a memory card inserted
into a USB card reader.
When connecting with a USB cable, use the USB 2.0
cable.
EN_KW-AVX830[E].indb 58EN_KW-AVX830[E].indb 58 10.1.19 3:10:01 PM10.1.19 3:10:01 PM

Other manuals for JVC KW-AVX730

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KW-AVX730 and is the answer not in the manual?

JVC KW-AVX730 Specifications

General IconGeneral
BrandJVC
ModelKW-AVX730
CategoryCar Receiver
LanguageEnglish

Related product manuals