JVC KW-M788BH User Manual

SettingsSettings
<Guidelines Setup>
Adjust the parking guidelines according to the size of
the car, parking space and so on.
When adjusting the parking guidelines, make sure to
use the parking brake to prevent the car from moving.
Select the
mark (1), and then adjust the position of
the selected mark (2).
Initialize
Make sure that A and B are horizontally parallel, and
that C and D are the same length.
• Touch and hold [Initialize ] for 2 seconds to set all
the marks to the initial default position.
<Reverse with ATT>
• ON (Initial): The sound is attenuated while the gear is
shifted to the reverse (R) position.
• OFF: Not used.
<Parking Assist>
Configure settings for using the ADS adapter.
<Parking Assist Display>
When an ADS adapter is connected, you can display
information about obstacles around the car.
• ON: Always displays information.
• Dyn. (Initial): Displays information when the sensor
detects obstacles.
• OFF: Cancels.
<Parking Assist Position>
Select where information about obstacles is displayed
on the screen.
• Left/Right (Initial)
<AV Input>
Select the usage of the AV-IN input terminal
(adjustable only when the AV source is turned off).
• AV-IN (Initial): Select this when an external AV device
is connected.
To watch the connected device, select [AV-IN] on
the source/option selection screen.
• Camera: Select this to watch the view from the
connected camera.
To watch the camera view, select [Camera] on the
source/option selection screen.
System settings
1 Display the <System> screen.
From the Home screen (page 3), touch as
follows:
Then, on the <Settings> screen, touch as follows:
[System] (1) → [Enter] for the item you adjust or
the appropriate setting for the item (2).
Settings
Language
Clock
Time Format
Time Zone
Enter
English
Enter
Enter
Enter
Audio
Display
Input
Key
System
Clock Adjust
2 Adjust the item if more steps are required.
See the respective explanation that follows.
<Language>
Select the text language used for on-screen
information. For details, see page 4.
“Please Ignition Off” appears when the setting is
changed. Turn the ignition switch off then on to
enable the change.
<Clock>
Set the date and clock adjustment method. For details,
see page 5.
50 ENGLISH
00KWM788BH780BT.indb5000KWM788BH780BT.indb50 2022/06/2116:172022/06/2116:17

JVC KW-M788BH Specifications

General

Brand	JVC
Model	KW-M788BH
Category	Monitor
Language	English