Turning off the AV source
1 Display the source/option selection
screen.
On the Home screen:
2 Turn off the AV source.
On the source/option selection screen (page 11):
• You can also use the pop-up function menu
(page 12).
Initial settings
When you power on the unit for the first time or
initialize the unit, the <Initial Settings> screen
appears.
Perform the initial settings.
Initial Settings
Demonstration
Language
Front Camera
Rear Camera
User Customize
Finish
ON
English
Enter
Enter
Enter
Viewing Angle
Enter
OFF
Once completed, Home screen appears.
<Demonstration> (page 48)
• ON (Initial): Activates the display demonstration.
• OFF: Deactivates the display demonstration.
<Language> (page 50)
Select the text language used for on-screen
information.
• English (Initial)/Español/Français
• GUI Language (Local (the language selected above)
(Initial)/English): Selects the language used for
displaying operation keys and menu items.
<Front Camera> (page 49)
Make the settings to display the picture from the
connected front view camera.
<Rear Camera> (page 49)
Make the settings to display the picture from the
connected rear view camera
<User Customize> (page 47)
Change the display design.
<Viewing Angle> (page 49)
Select the viewing angle in relation to the monitor to
make the image on the screen easier to see.
• Under 0° (Initial)/5°/10°/15°/20°
Components Name and Basic OperationsComponents Name and Basic Operations
On the screen:
1 Display the source/option selection
screen.
On the Home screen:
2 Turn off the power.
On the source/option selection screen (page 11):
Adjusting the volume
You can adjust the volume (00 to
40) by pressing + to increase and
pressing – to decrease.
• When volume level is below 15,
holding + increases the volume
continuously to level 15.
Attenuating the sound
On the source control screen:
.
To cancel attenuation:
4 ENGLISH
00KWM788BH780BT.indb400KWM788BH780BT.indb4 2022/06/2116:162022/06/2116:16
To Next Page
Loading...
Need help?
General
