40
REMOTE CONTROLLER REMOTE CONTROLLER
The unit is equipped with steering wheel remote
control function.
• See page 45 for connection.
• Operations may differ depending on the type of
steering wheel remote control.
Preparation
R Removing the battery sheet
Pull the battery sheet out fromthe remote controller
to activate the battery.
R Changing the battery of the remote
controller
CR2025 (+side)
• Use a commercially available button battery
(CR2025).
• Insert the battery with the + and – poles aligned
properly.
– If the effectiveness of the remote controller
decreases, replace the battery.
V Caution:
• Keep the battery out of reach of children and in
original package until ready to use. Dispose of
used batteries promptly. If swallowed contact
physician immediately.
• Do not leave the battery near fire or under direct
sunlight. A fire, explosion or excessive heat
generation may result.
• Do not set the remote control in hot places such
as on the dashboard.
• Danger of explosion if Lithium battery is
incorrectly replaced. Replace only with the same
or equivalent type.
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the unit.
• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).
KW-VEntryU.indb40KW-VEntryU.indb40 2014/09/1019:502014/09/1019:50
To Next Page
Loading...
Need help?
General
