ENGLISH
19SETTINGS
Continued on the next page
Adjusting the sound
1
2 Adjust the level.
BAS *
1
(bass)
Adjust the bass.
–06 to +06
MID *
1
(mid-range)
Adjust the mid-range frequencies
sound level.
–06 to +06
TRE *
1
(treble)
Adjust the treble.
–06 to +06
FAD *
2
(fader)
Adjust the front and rear speaker
balance.
R06 to F06
BAL *
3
(balance)
Adjust the left and right speaker
balance.
L06 to R06
LOUD *
1
(loudness)
Boost low and high frequencies to
produce a well-balanced sound at low
volume level.
LOUD ON or
LOUD OFF
SUB.W (subwoofer)
Adjust the subwoofer output level.
00 to 08,
initial: 04
VOL (volume)
Adjust the volume.
00 to 30
(or 50) *
4
*
1
When you adjust the bass, mid-range, treble, or
loudness, the adjustment you have made is stored
for the currently selected sound mode (iEQ) including
“USER.”
*
2
If you are using a two-speaker system, set the fader
level to “00.”
*
3
The adjustment will not affect the subwoofer output.
*
4
Depending on the amplifier gain control setting. (See
page 21 for details.)
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table on pages 20 and 21.
1 Enter the PSM settings.
2 Select a PSM item.
3 Select or adjust the selected PSM item.
4 Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5 Finish the procedure.
EN14-21_KW-XG500[J]_1.indd 19EN14-21_KW-XG500[J]_1.indd 19 2/26/07 2:57:40 PM2/26/07 2:57:40 PM
To Next Page
Loading...
Need help?
General
