Display the menu bar
Select “Set Up”
Select “Edit / Manual”
Confirm settings
Finish
When coming from “Initial settings” (P. 12), skip to @.
Select a row
Edit
Move a
channel’s
position
MOVE
Editing ATV channels
Edit the channels registered with “Auto Program” in “Initial settings”
(P. 12)
.
To the previous
screen
Exit
8
7
6
5
4
3
2
If “Feature Not Available”
appears :
Is a “T-V LINK”
compatible device
connected to “EXT-2”?
Is the device turned on?
“T-V LINK” (P. 12)
When not using
“T-V LINK”
When using
“T-V LINK”
Edit a
channel
name
ID
Insert
a channel
INSERT
Delete
a channel
DELETE
Register a
new channel
MANUAL
select
move out move in
select
enter
the first
character
next
column
From high
frequencies
or
When selecting a preset name from the “ID LIST”
When manually naming a channel
Auto-search begins, and the nearest
frequency is imported.
Repeat the previous steps until the
desired channel is displayed
From low
frequencies
1 Begin 2 Select a destination 3 Finish
1 Begin 2 Enter a channel name
2 Enter a CH number
2 Search for a channel1 Begin
3 Set
Picture fine tuning
1 select
2 next
1 select
2 next
1 select
2 set
1 enter
2
next
column
3 set
1 Begin
Receives the
broadcast signal.
1 Delete
1
Select ATV
(red) (blue)
(red)
CH / CC List (P. 47)
In Ireland, select CH/CC with 1 4.
/
To Next Page
Loading...
Need help?
General
