GB-47
DTV SOFTWARE UPDATE (IN DIGITAL TV MODE ONLY)
In order to maintain proper performance of the TV, it is essential to have
the most up-to-date software.
NOTE: You can access this menu only in Digital TV input mode.
How to Navigate the Menu
Button Action
MENU
Displays the menu.
▲/▼ Moves among menus or items.
OK or
► Selects (Enters) a menu or confirms a selection.
BACK or
◄ Goes back to the previous screen.
NUMBER
Enters the number (0~9).
NOTE:
The default PIN code is 0000. If you have forgotten the PIN code, please contact your local TV distributor.
You can easily navigate the DTV Setup menus using the assigned numeric for each menu. Press the 2-2 buttons in order
at DTV Setup menu to select Language Setting menu.
Select DTV Setup > Installation > Software Update.
NOTE: It is not possible to access the DTV Setup > Installation menu during recording or playback. You will need to stop
therecording/playbacktoaccessthemenu.
Automatic Update
1 Select Automatic Update.
2 Automatically search for new software.
Manual Update
1 Select Manual Update.
2 Select a channel to update and enter the frequency.
3 Select Search to search software.
Whendetectingsoftwareupdate,selectYes
and press the OK button to start updating. Select No and press the OK
button to return to the previous menu without updating. If new software is not found by automatic update, use manual
update.
Whencompletingthesoftwareupdate,theTVisautomaticallypoweredoffandonagain.
▪
▪
Sub-menus Items Options
Installation
Country
Auto Search
Manual Search
Software Update
Default Setting
United Kingdom
/ Move to the selected submenu
/ Select or set the option
Manual Update
Channel
Frequency
2
50500
Search
Strength (0%)
Quality (0%)
/ Move to the selected submenu
Software Update
Automatic Update
Manual Update
Regular Auto Update
Search Time
Disable
-- : --
To Next Page
Loading...
Need help?
General
