Playback Control Buttons
Pause
If you press the PAUSE (
)button on the remote control, the current
programme is paused. If you press the PAUSE (
) button once again, the
programme is resumed from that point..
NOTE: Pause makes the time gap or delay between the broadcasting
(live) point and watching point. The time gap is equivalent to the period the
programmewaspaused.Operationslikeslowmotionandfastrewindalso
make the time gap. Press the STOP ( ) button to go to the live programme.
Stop
Press the STOP ( ) button to stop the playback and go to the live
programme.
Fast Forward to the Next Scene
Press the FAST FORWARD ( ) button on the remote control to fast forward the programme. Each time you press
the FAST FORWARD ( ) button, the speed increases. ( x2, x4, x16, x32, x64)
If you press the PLAY(►)button,thefastforwardoperationstopsandtheprogrammeisplayedatnormalspeed.
NOTE: You can use the fast forward operation only when there is a time gap between the current watching point and the
broadcasting (live) point caused by some previous operations such as pause, slow motion or fast rewind. You can fast
forward to the current broadcasting point. If the watching point reaches the broadcasting (live) point, the programme is
automatically played at normal speed.
Fast Rewind to the Previous Scene
Press the FAST REWIND ( ) button on the remote control to watch the scene passed by. Each time you press the
FAST REWIND ( ) button, the rewind speed increases. ( x2, x4, x16, x32, x64)
If you press the PLAY(►)button,thefastrewindoperationstopsandtheprogrammeisplayedatnormalspeed.
NOTE: You can fast rewind back to the start point. If you reach the start point while rewinding, the programme is
automatically played at normal speed from that point.
Slow Motion
Press the SLOW button to play the current programme in slow motion. Each time you press the SLOW button, the
speeddecreases(x1/2,x1/4,x1/8).PressthePLAY(►)buttontostopplayinginslowmotionandreturntonormal
speed.
Instant Replay
Press the REPLAYbuttontoreplaythecurrentprogrammefromthe7secondsbefore.Whenthereplayhasbeen
completed, the programme will play from the current point.
To change the instant replay time, refer to Miscellaneous Settings (p.46).
Commercial Skip
Press the SKIP button to skip 30 seconds ahead from the current watching point. You can use the skip operation only
when there is a time gap between the current watching point and the broadcasting point. If the time gap is less than
30 seconds, the programme is played from the current broadcasting point. To change the commercial skip time, refer
to Miscellaneous Settings (p.46).