JVC NX-PS2 User Manual

16
Playing Back from USB Mass Storage Class Device
This system is equipped with a USB MEMORY terminal on the front panel. You can connect a USB
mass storage class device such as a USB flash memory device, Digital Audio Player (DAP), etc. to
this System.
This System cannot recognize a USB mass storage class device whose rating exceeds 5V/500mA.
Connecting the USB Mass Storage Class Device
When connecting a USB mass storage class device, refer also to its manual.
• When disconnecting the USB mass storage class device, make sure that the System is in the stop condition.
Basic Operations
To select USB MEMORY for the source
Basic USB MEMORY Operations
Select USB MEMORY for the source and start playback.
• USB MEMORY can also be selected by the FUNCTION button on the main unit.
Button
Function
On the Unit On the remote
Starts playback / Pauses
Stops playback
Increases the track numbers.
Press and hold: Fast forward search
Decreases the track numbers.
Press and hold: Fast reverse search
(Press this button during playback to jump back to the beginning of
the track.)
ST
ANDBY
AUX
PHONES
USB
MEMOR
Y
DAP
or
NX-PS2[A].BOOK Page 16 Friday, April 20, 2007 8:36 PM

JVC NX-PS2 Specifications

General

Brand	JVC
Model	NX-PS2
Category	Speaker System
Language	English