33
PBC operation
concept
Disc SearchTrack Search
canceled
Moving to a Particular Portion Directly
You can move to a particular portion (scene) on the track directly.
• PBC function is canceled when you use this function.
From the remote control ONLY:
1
Press SEARCH during playback or pause.
• Each time you press the button, the following
indication appears on the TV screen.
2
Press cursor 5/∞ to select the
item (only for Disc search.)
Track Search:
Time : Select this to move to a
particular portion on the
current track.
Disc Search:
Time : Select this to move to a particular portion on the
current disc.
Track: Select this to move to a particular track on the current
disc.
3
Press number buttons to select
a desired track or playing
time.
The unit starts playback of the selected
item.
How to input the playing time
• To input time “09:45,” press 9, 4, 5, then ENTER.
• To input time “45:23,” press 4, 5, 2, 3, then ENTER.
• To cancel a misentry, press CLEAR.
How to input the track number
Press the number buttons corresponding to the number, then
press ENTER to start playback.
• To select number 5, press 5, then ENTER.
• To select number 12, press 1, 2, then ENTER.
• To cancel a misentry, press CLEAR.
Note:
When playing back is stopped, you can use only Disc Search.
Disc Menu–Driven Playback (Only for VCD)
The Play Back Control function (PBC) allows you to operate the
VCD using menus.
When you start playing a VCD with PBC function, a menu will
automatically appear on the TV screen.
• A menu may be a list of items, divided screens, or some moving
pictures. (See “PBC operation concept” below.)
When a menu appears, you can select a desired item on the menu.
• When a list of items is displayed on the TV screen, press the
number buttons to select an item.
• When “3” or “SELECT” is displayed on the TV screen, press
3 to start playback.
From the remote control ONLY:
To go to the next submenu
Press ¢.
To return to the previous submenu
Press 4.
REAR-RREAR-L
TEST
CLEAR SETTING
1234
5678
90
CENTER
SUBWOOFER
From the remote control ONLY:
To cancel the PBC playback
You can turn on and off the PBC function by pressing
MENU on the remote control. Each time you press the
button, the PBC function turns on and off.
Note:
If you select shuffle play, program play, or repeat play, the PBC
function is canceled.
To activate the PBC function
1) Press ON SCREEN.
2) Press cursor 5/∞ to select “Mode.”
3) Press ENTER repeatedly to select “PBC.”
4) Press cursor 5/∞ to select “OK,” then press ENTER.
Selecting Playback Channel
When you play back VCD or CD, you can only select either the left
channel or right channel to listen to.
Press AUDIO repeatedly.
Each time you press the button, the sound mode changes
as follows:
Stereo \ Left channel \ Right channel
\ (back to the begininng)
Notes:
• While activating Surround mode or DSP mode, this function does
not work.
• On some discs, this function does not work.
EN32-37TH-A35[B].pm6 03.3.13, 2:33 PM33
To Next Page
Loading...
Need help?
Amplifier Section
