48
Tuner Operations
RDS allows FM stations to send an additional signal along with their
regular program signals. For example, the stations send their station
names, as well as information about what type of program they
broadcast, such as sports or music, etc.
When tuned to an FM station which provides the RDS service, the
RDS indicator lights up on the display.
Notes:
• RDS is not available for AM broadcasts.
• RDS may not operate correctly if the tuned station is not
transmitting RDS signals properly or if the signal strength is weak.
Using the RDS (Radio Data System)
to Receive FM Stations
What information can RDS signals provide?
You can see the following RDS signals the station sends on the
display.
PS NAME:
While searching, “PS NAME” appears, then the station names will
be displayed. Station frequency appears if no signal is sent.
Frequency:
Station frequency.
PROG TYPE (Program Type):
While searching, “PROG TYPE” appears, then the current PTY
code appears. “NO PTY” appears if no signal is sent.
RADIO TEXT:
While searching, “RADIO TEXT” appears, then text messages the
station sends will be displayed. “NO RT” appears if no signal is
sent.
From the remote control ONLY:
Make sure that the remote control is for the tuner operation. If not,
press FM/AM on the remote control so that the remote control can
be used for the tuner operation.
Press RDS while listening to an FM station to show the
RDS signals.
• Each time you press the button, the display changes to
show the following information:
About characters shown on the display
When the display shows PS NAME, or RT signals, the following
characters are used.
• The display cannot differentiate upper case and lower case letters
and always uses upper case letters.
• The display cannot show accented letters, “A” for instance, may
stand for accented “A” like “Å, Ä, Ã, Á, À, Â, å, ä, ã, á, à, and â.”
Note:
If searching finishes at once, “PS NAME,” “RADIO TEXT,” and “PROG
TYPE” will not appear on the display.
PS NAME
RADIO TEXT PROG TYPE
Normal indication
(Frequency)
RDS indicator
PTY 9/(
PTY SEARCH
ENTER
TV
VCR
STANDBY/ON
AUDIO
VCRTV
CENTER
REAR-RREAR-L
TEST
DVD FM/AM
CONTROL
AUX
TV/VIDEO
MUTING
REC/MEMORY
SEARCH
TOP
MENU
MENU
PTYPTY
NEWS/INFO
PTY SEARCH
CHOICE
DOWN - TUNING - UP
SLOW
AUDIO
RETURN DIMMER DSP
SLEEP
RM-STHA35R
DVD CINEMA SYSTEM
SURROUND
SUB TITLE ANGLE ZOOM
ON SCREEN
RDS
CLEAR SETTING FM MODE
SUBWOOFER
TV VOL
AUDIO VOL
SOUND
ENTER
1234
5678
90
RDS
If the remote control is not for the tuner operations, the
button for the RDS operations—NEWS/INFO, PTY + and –,
and PTY SEARCH—do not work. In this case, press FM/AM
on the remote control so that the remote control can be used
for the tuner operation.
Then, the display shows its PS name.
EN46-51TH-A35[B].pm6 03.1.20, 11:25 AM48
To Next Page
Loading...
Need help?
Amplifier Section
