DNR LEVEL
Sets DNR (Digital Noise Reduction). When set to "HIGH", noise is effectively
reduced but picture quality of the video deteriorates.
[Setting values : NORMAL, HIGH] (Default value: NORMAL)
Memo
Set DNR (Digital Noise Reduction). Setting to "HIGH" will improve the
DNR effect but afterimage is likely to occur for moving subjects.
VIDEO EFFECT Screen
D.ZOOM
Sets electronic zoom magnification ratio.
[Setting values : WIDE (x1), MID (x1.4), TELE (x2)] (Default value: WIDE)
Memo
As the video is digitally processed when electronic zoom is used, picture
quality may deteriorate slightly.
REVERSE MODE(TK-C9300U/E, TK-C9301EG, TK-C9200U/E, TK-C9201EG)
Enables the reverse mode to be set. When set to "ON", the image is inversed
horizontally and vertically.
[Setting values : OFF, ON] (Default value: OFF)
PRIVACY MASK Screen
This function allows you to set and mask the parts on the screen that you do not
wish to shoot so that they are not recorded.
For details, refer to "Setting the Privacy Mask" (A page 15) .
BRIGHTNESS
Sets the brightness of the part of the image that was masked. The smaller the
value, the darker the image. The larger the value, the brighter the image.
[Setting values : 0 to 10 to 15] (Default value: 10)
MASK No.1-4
[Setting values : OFF, ON] (Default value: OFF)
Memo
Privacy mask can be individually set for each number. Up to four masked
areas can be set. Set to "ON" and press the [SET] button to display the
mask setting screen.
ADVANCED MENU
10
To Next Page
Loading...
Need help?
General
