ALC SETTINGS Screen
BRIGHTNESS
Adjusts video signal brightness level. The larger the value, dark area becomes
more visible. The smaller the value, bright area becomes more visible.
[Setting values : -5 to NORMAL to 5] (Default value: NORMAL)
BLC AREA
Press the [SET] button to display the fixed photometry area. Select one of the
following four types.
.
AREA 1 AREA 2 AREA 3 AREA 4
Photometry area
[Setting values : AREA1 to AREA4] (Default value: AREA1)
Memo
When the BLC (backlight compensation) selector switch is set to "OFF",
[BLC AREA] does not work even if it is set.
AVERAGE:PEAK
Sets the exposure detection method to the ratio of the AVERAGE value and
PEAK value.
[Setting values : 10:0, 9:1, 8:2, 7:3, 6:4, 5:5] (Default value: 8:2)
v
Setting example
10:0 : When the screen, other than the highlighted section, becomes dark,
increase the AVERAGE value like in the example.
5:5 : When halation occurs on the highlighted section of the screen, increase the
PEAK value like in the example.
ALC PRIORITY
Sets whether to prioritize motion or picture quality when the subject becomes
dark.
[Setting values : MOTION, COMBO, PICTURE] (Default value: MOTION)
ADVANCED MENU
7
To Next Page
Loading...
Need help?
General
