English
8
Using the Tuner
FM mode
indicators
Tuning In a Station
1 Press the FM/AM button.
The band and frequency you were last tuned to appear on the
display.
(If the last station was selected using the preset number, the
preset number appears first.)
Each time you press the button, the band alternates between
FM and AM.
2 Select a station using one of the
following methods.
■ Manual Tuning
Press the 4 or ¢ button repeatedly to move from
frequency to frequency until you find the station you want.
OR
■ Auto Tuning
If you press and hold the 4 or ¢ button for one second or
more, the frequency changes down, or up, automatically until a
station is found.
OR
■ Preset Tuning using the Remote Control (Possible
only after presetting stations)
Select the desired preset number using the UP, DOWN, > or <
button on the Remote Control. After one second the display
will show the preset number’s band and frequency.
Example: To select preset number 12, press the UP button until
“P12” appears.
When the System is in use, the display shows other items as well.
For simplicity, only the items described in this section are shown here.
Band display, Frequency
display, Preset channel
FM/AM
¢
4
You can listen to FM and AM stations. Stations can be tuned in
manually, automatically, or from preset memory storage.
■ Before listening to the radio:
• Make sure that both the FM and AM antennas are correctly
connected. (See page 3.)
Setting the AM tuner interval
spacing –––––––––––––––––––––––––––––––
When shipped, the AM tuner interval is set to 9 kHz or 10 kHz
spacing (Initial setting: U/UB/US/UT/UX...9 kHz). You can change
it to 10 kHz or 9 kHz spacing.
To select 10kHz intervals, while holding down the ¢ button
on the unit in Standby mode, press the button on the unit to
turn on the power. (At the same time, the 100kHz spacing is
selected for FM broadcast)
To select 9kHz intervals again, while holding down the 4
button on the unit in Standby mode, press the button on the
unit to turn on the power.
Note: When you change the setting, the preset stations are erased.
You will need to preset the stations again. (See page 9.)
One touch radio ––––––––––––––––––––––
Just press the FM/AM button to turn on the System and start
playing the station you were last tuned to.
■ You can switch from any other sound source to the radio by
pressing the FM/AM button.
FM/AM
AM
FM
[9 kHz Intervals]
DOWN
UP
+
+
UB... Hong Kong UX... Saudi Arabia
US... Singapore UT... Taiwan ROC
AM
FM
FM/AM
(On the Unit) (On the Remote Control)
DOWNUP
(After 1 second)
or
PREV NEXT
DOWN UPMULTI CONTROL
TAPE FM/AM CD
STANDBY
PHONES
AUX
REC
REV
MODE
AHB
PRO
TIMER
CLOCK
VOLUME
CD
OPEN/CLOSE
SELECT
RETURN
VCD
NUMBER
AUTO PRESET
FM/AM
FM MODE
4
DOWN
REMOTE CONTROL RM-SUXV50V
CANCELTREBLE
FM/AM
FM
MODE
DISPLAYSLEEP
AUX
TAPE CD
CD
BASS
AHB
PRO
RANDOM
AUTO
PRESET
REPEAT
PROGRAM
VOLUME
VOCAL
MASKING
ON
SCREEN
ECHO
V. INTRO
PREV
NEXT
SELECT
SET
VCD NUMBER
UP
VCD NUMBER
DOWN
UP
< PREV
NEXT>
SET
¢
[10 kHz Intervals]
EN01-09.UX-V50[U] 6/30/00, 4:528
To Next Page
Loading...
Need help?
General
