13
English
3 Within five seconds, press the ¢ or 4
Button on the Unit to select the System's
TV output mode.
Each time you press the button, the TV output mode changes as
follows:
NTSC O PAL O PAL AUTO O (back to beginning)
NTSC: for NTSC exclusive TV
PAL: for PAL exclusive TV
PAL AUTO: for multisystem TV
4 Within five seconds, press the 7 button
on the Unit to apply the changes.
5 Turn on the TV and select the video input
on the TV.
6 Press the AUX or TAPE @# button to
turn on the System.
“Video CD JVC” screen will appear on the TV without
distortion.
Notes:
• If you play an NTSC CD in PAL AUTO mode on a PAL
exclusive TV, the image may be distorted. If this happens
change the CD Player's TV output mode to “PAL”.
• When you play an NTSC CD in PAL AUTO mode on a
multisystem TV, the image may blink for a moment. This
symptom occurs when the System detects the formula of the
CD and is not a malfunction.
• You can configure the current TV output mode anytime by
pressing the 7 button on the Unit for more than 2 seconds.
When the System is in use, the display shows other items as well.
For simplicity, only the items described in this section are shown here.
You can play video CDs (with or without the Playback Control
(PBC) function) and CD Graphics (CD-Gs) to watch the picture on
your TV while listening to the sound through your JVC Micro
Component System.
■ Before playing video CDs and CD-Gs
• Make sure that the connection between the System and
your TV is correct. If you wish, you can listen to the music
on your TV by connecting the LINE OUT signals to your
TV. (See page 4)
Setting the TV System
To view a picture of video CDs or CD-Gs, it is required that you
set your CD player's TV output mode according to your TV's color
system.
Relationship among the playable CDs, System's TV output
mode and your TV's color system:
Playable CD Player's TV output mode Your TV's color system
NTSC/PAL NTSC NTSC
NTSC/PAL PAL PAL
NTSC/PAL PAL AUTO Multisystem
1 Turn off the power to put the System into
Standby mode.
2 Press the 7 button on the Unit for more
than 2 seconds.
The current TV output mode (“NTSC” for example) appears on
the display for five seconds.
RETURN
MULTICONTROL
RETURN
MULTICONTROL
DOWN
UP
CD Cover
Using the Video CD Player (Video
CDs and CD-Gs
4
7
¢
CD OPEN/
CLOSE 0
CD #/8
VCD Number
DOWN
7
SET
ON
SCREEN
< PREV
REMOTE CONTROL RM-SUXV50V
CANCELTREBLE
FM/AM
FM
MODE
DISPLAYSLEEP
AUX
TAPE CD
CD
BASS
AHB
PRO
RANDOM
VOCAL
MASKING
AUTO
PRESET
ECHOREPEAT
PROGRAM
VOLUME
ON
SCREEN
V. INTRO
SELECT
SET
VCD NUMBER
UP
VCD NUMBER
DOWN
PREV
NEXT
NEXT >
CD #¥8
PREV RETURN NEXT
DOWN UPMULTI CONTROL
TAPE FM/AM CD
STANDBY
PHONES
AUX
REC
REV
MODE
AHB
PRO
TIMER
CLOCK
VOLUME
CD
OPEN/CLOSE
VERTICAL DISC
LOADING MECHANISM
VIDEO CD VERSION 2.0VIDEO CD VERSION 2.0
SELECT
VCD
NUMBER
VCD Number
UP
V. INTRO
VOLUME +,-
2 3 4
EN10-28.UX-V50[U] 6/21/00, 6:1013
To Next Page
Loading...
Need help?
General
