17
English
AUTO REVERSE
AUTO TAPE SELECTOR
TAPE
Using the Cassette Deck
(Listening to a Tape)
TAPE @ #
4
7
¢
REV. MODE
When the System is in use, the display shows other items as well.
For simplicity, only the items described in this section are shown here.
Tape Direction indicator
Reverse Mode indicator
PREV RETURN NEXT
VCD
NUMBER
DOWN UPMULTI CONTROL
TAPE FM/AM CD
STANDBY
PHONES
AUX
REC
REV
MODE
AHB
PRO
TIMER
CLOCK
VOLUME
CD
OPEN/CLOSE
SELECT
The Cassette Deck allows you to play and record audio tapes.
■ With Automatic Tape Detection, you can listen to type I, II or
IV tapes without having to change any settings.
The use of tapes longer than 120 minutes is not recommended,
since characteristic deterioration may occur and these tapes
easily jam in the pinch-rollers and the capstans.
One touch play –––––––––––––––––––––––
By pressing the TAPE @ # button on the Unit or the Remote
Control, the Unit will come on, “TAPE” appears on the display,
and if a tape is in the deck, it will start to play. If no tape is loaded,
the Unit will come on and wait for you to insert a tape, or select
another function.
Standard Play
When the power is already on, you can use this basic procedure:
1 Press the TAPE 0 button on the Unit.
2 When the cassette holder opens, put the
cassette in, with the side you want to
listen to facing up.
• If the cassette holder does not open, turn off the Unit , then
turn it back on and press the TAPE 0 button again.
3 Close the holder gently until it clicks.
4 Press the TAPE @ # button.
The tape is played in the direction shown by the Tape Direction
indicator.
5 If you need to change the playback
direction, press the TAPE @ # button
again.
The other Tape Direction indicator lights up and the tape
playback direction changes.
To stop playing, press the 7 button.
To remove the tape, stop the tape, and press the TAPE 0 button on
the Unit.
Fast-winding a tape ––––––––––––––––––
■ Press the ¢ or 4 button to fast-wind the tape.
• The Cassette Deck automatically stops when the tape
reaches its end.
Reverse Mode
You can set the cassette deck to play one side of a tape, both sides
once, or both sides continuously.
Press the REV. (reverse) MODE button on
the Unit.
The indicator changes at each press of the button as shown.
: The Cassette Deck automatically stops after playing both
sides of the tape. (Stops when playback in the 2
direction is finished.)
: The Cassette Deck continues to play both sides of the
tape until the 7 button is pressed.
: The Cassette Deck automatically stops after playing one
side of the tape.
TAPE @ #
VCD NUMBER
UP
REMOTE CONTROL RM-SUXV50V
CANCELTREBLE
FM/AM
FM
MODE
DISPLAYSLEEP
AUX
TAPE CD
CD
BASS
AHB
PRO
RANDOM
AUTO
PRESET
REPEAT
PROGRAM
VOLUME
VOCAL
MASKING
ON
SCREEN
ECHO
V. INTRO
PREV
NEXT
SELECT
SET
VCD NUMBER
DOWN
¢
7
TAPE 0
Cassette
holder
4
EN10-28.UX-V50[U] 6/21/00, 6:1117
To Next Page
Loading...
Need help?
General
