English
3
English
CAUTION: Make all connections before plugging the System into an AC power outlet.
Connecting the FM Antenna
Turn the loop until you have the best reception.
CAUTION:
To avoid noise, keep antennas away from the
System, the connecting cord and the AC power
cord.
Connecting the AM Antenna
AM Loop Antenna (supplied)
Attach the AM loop to its base by snapping the tabs on the loop
into the slot in the base.
Using the supplied Wire Antenna
Using the coaxial type connector
(not supplied)
A 75 Ω antenna with coaxial type connector (IEC or DIN 45325)
should be connected to the FM (75 Ω) COAXIAL terminal.
If reception is poor, connect the outdoor antenna.
Note: Before attaching a 75 Ω coaxial lead (the kind with a
round wire going to an outdoor antenna), disconnect the
supplied FM Wire Antenna.
FM Wire Antenna
(supplied)
Coaxial cable
FM outdoor antenna
(not supplied)
AM EXT
AM LOOP
FM (75Ω)
COAXIAL
ANTENNA
OPTICAL
DIGITAL OUT
RL
R
L
SPEAKERS
IMPEDANCE
MIN 4Ω
AC IN
VOLTAGE SELECTOR
110V
127V
230V
Rear Panel of the Unit
Rear Panel of the Unit
For
Hong Kong
only
For
Hong Kong
only
OPTICAL
DIGITAL OUT
RL
R
L
SPEAKERS
IMPEDANCE
MIN 4Ω
AC IN
VOLTAGE SELECTOR
110V
127V
230V
EN01-09.UX-V50[U] 6/21/00, 5:593
To Next Page
Loading...
Need help?
General
