English
4
CAUTION: Make all connections before plugging the System into an AC power outlet.
Connecting the Speakers
For each speaker, connect one end of the speaker wire to the speaker terminal on the back of the System.
1. Open the terminals and insert the speaker wires firmly, then close the terminals.
2. Connect the red (+) and black (–) wires of the right side speaker to the red (+) and black (–) terminals marked R on the System.
Connect the red (+) and black (–) wires of the left side speaker to the red (+) and black (–) terminals marked L on the System.
CAUTION:
If a TV is installed near the speakers, the picture on the TV may be distorted. If this happens, set the
speakers away from the TV.
Connecting External Equipment
For Hong Kong:
Connect signal cords (not supplied) between the System’s LINE IN (AUX)/LINE OUT terminals and the output/input terminals of an
external MD recorder, cassette deck, etc.
You can then listen to the external source through the System, or record the System’s CD player, cassette tape, or tuner to the external unit.
For other areas:
You can connect audio equipment — used only as a playback device.
Connect the audio output terminals on the other equipment and the LINE IN (AUX) terminals on the rear, using a signal cord (not supplied).
Connecting a TV
Connect the video cord (supplied) between the System’s VIDEO OUT terminal and the video input jack of your TV. When you want to listen
to the music on your TV, connect the signal cord (not supplied) between the System’s LINE OUT terminals and the audio input jacks of your
TV
L
R
SPEAKERS
IMPEDANCE
MIN 4Ω
Right speaker (rear side)
Left speaker (rear side)
Black
LINE OUT
LINE IN
(AUX)
RL
Signal cord (not supplied)
Pin-plug x 2
Signal cord (not supplied)
Pin-plug x 2
Pin-plug x 2Pin-plug x 2
To audio output
MD recorder or cassette
deck (not supplied)
To audio input
For Hong Kong only
LINE OUT
LINE IN
(AUX)
VIDEO OUT
RL
Signal cord (not supplied)
Video cord (supplied)
Pin-plug x 2
TV
Pin-plug x 2
For Hong Kong only
To audio input
To video input
EN01-09.UX-V50[U] 6/21/00, 5:594