Configuration and Operation
Page Operating Instructions for Powador -_EN
.. Inverter menu
Opening the menu
↻ The inverter is in grid-feed mode.
↻ The LCD is showing the grid parameters.
Press the “” key.
» The power and con guration values are displayed in succession by pressing key "" multiple
times or by pressing and holding it.
Displaying the daily output
↻ The inverter is operating.
↻ The LCD is showing the grid parameters.
Press key "" repeatedly or press and hold until the display shows "Yield today".
» The LCD is showing the daily yield.
To return to the base display, press key "" repeatedly or press and hold or wait for one minute
without pressing a key.
Setting display language
↻ The LCD is showing menu level "".
↻ The "Language" menu item is displayed.
Press "" to select the language.
Press "" to change the language.
» After selection, menu level "" is displayed in the selected language for the country.
Selecting a menu item
↻ The inverter is operating.
↻ The inverter displays a selection menu item.
Press "" to make a selection.
Press "" to con rm a selection.
» The next menu item is displayed.
Making settings
↻ The inverter is operating.
↻ The LCD is showing a setting menu item.
Press "" to navigate to the setting position.
Press key "" repeatedly or press and hold until the setting value is correctly shown.
» After running though all setting positions the value is saved and the next menu item is displayed.
Selecting menu level ""
↻ The inverter is operating.
↻ The LCD is showing the unit name.
Press keys "" and "" simultaneously.
» The LCD is showing the software version.
Press key "" repeatedly or press and hold.
» The display runs through menu level "" and returns to the start point.
To return to menu level "", press keys "" and "" simultaneously or wait for one minute without
pressing a key.
To Next Page
Loading...
