EasyManuals Logo
Home>Kärcher>Floor Machine>KMR 1000 T

Kärcher KMR 1000 T User Manual

Kärcher KMR 1000 T
Go to English
217 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
English KMR 1000 T 20
Fastening area
Fastening area
Note:
Observe markings for fastening areas
on base frame!
(chain symbols)
CLEANING AND CARE
Stand sweeper on a flat surface.
Adjust "parking brake" operating
mode.
Internal cleaning
Wear dust mask!
Wear safety goggles!
! Clean with a rag.
! Blow-out with compressed air.
External cleaning
Clean with a moist rag.
Note:
Do not use any aggressive cleaning
agents!
MAINTENANCE INTERVALS
Maintenance by the customer
Daily maintenance
! Check roller and side brush for
wear and trapped straps
! Check the engine oil level
Maintenance weekly
! Check the tyre air pressure
! Check engine air cleaner
Maintenance every 50 operating
hours
! For engine oil change, filling
quantity, and type see Technical
Data.
! Check engine air cleaner
! Check the dust filter
! Check battery
! Check the sealing strip
Note:
Where maintenance is undertaken by
the customer, all service and
maintenance work must be carried
out by a qualified employee.
Kärcher dealer can be called in at
any time if necessary.
Maintenance by the customer
service organisation
Maintenance after 5 operating
hours
First inspection.
Maintenance every 100 operating
hours
Maintenance every 500 hours
Note:
To ensure the guarantee, all service-
and maintenance work must be
carried out by authorised Kärcher
customer service during the
guarantee period..
MAINTENANCE TASKS
Safety instructions
Preparations
! Stand sweeper on a flat surface.
! Adjust "parking brake" operating
mode.
Note:
If the sweeper will be tilted more than
20°, empty the fuel tank beforehand
and drain the engine oil.
Check the engine oil level
Danger of burns!
Let the engine cool-down.
! Turn the machine off on a level
surface
! Clean the area around the oil dip
stick
! Unscrew sealing cover with oil dip
stick
! Wipe the oil dip rod and push it in
! Pull-out the oil dip rod
The oil level must be between the
"Min" and the "Max" marks.
Top up the engine oil if the oil level
is below the "Min" mark.
Do not fill up beyond "Max".
Refill engine oil
! Turn the machine off on a level
surface
! Clean the area around the oil dip
stick
! Unscrew sealing cover with oil dip
stick
Fill-in engine oil
Oil types: See technical data.
! Close the oil fill opening
! Wait for at least 5 minutes
! Check the engine oil level

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kärcher KMR 1000 T and is the answer not in the manual?

Kärcher KMR 1000 T Specifications

General IconGeneral
BrandKärcher
ModelKMR 1000 T
CategoryFloor Machine
LanguageEnglish

Related product manuals