To Next Page

To Previous Page

Remove clothes immediately if they have been contaminated with acid.

CAUTION

●The positive (+) connector MUST be connected to the positive (+)

terminal/post. Otherwise, serious damage will occur to the electrical

system.

●Connect the battery wiring connector to the central relay box wiring

connector.

6.6.9 Repeat steps 7-8 for the other battery.

6.6.10 Verify that all connections are correct and terminals are secure.

6.6.11 Install the new batteries with cable assemblies onto the scooter.

6.6.12 Charge the batteries.

1. Battery Wiring Connector

2. Battery Cable

3. Battery Terminal Insulator

4. Battery Terminal

5. Lock Washer

6. Bolt

7. Battery Handle

8. Nut

Figure 6.3

6.7 Cleaning the Batteries

If a battery is contaminated by dirty water, battery acid, dust or other soil, the

battery will discharge quickly. Therefore, please follow the following steps to clean

the battery:

6.7.1 Turn the power OFF；

6.7.2 Remove the driver's seat；

6.7.3 Remove the rear casing and unplug the taillight and signal lights from the

electrical system;

6.7.4 Use a clean cloth to wipe off the soiled area；

6.7.5 Take out the battery； and

6.7.6 Clean the battery with a clean cloth

Karma KS-7 Series User Manual

Questions and Answers: