D
Alternate Calibration Sources
D-1
Introduction
As stated in Sections 1 and 2, the Fluke 5700A Calibrator is
the calibration source recommended for both performance
verification and calibration. Table D-1 summarizes alternate
calibration equipment that may be substituted for the recom-
mended Model 5700A. Note, however, that the alternate
equipment may not be as precise for certain calibration val-
ues. Refer to the manufacturers’ specifications for more de-
tailed information.
Table D-1
Alternate calibration sources
Manufacturer and Model Function(s)
Comparison to
5700A uncertainty
Fluke 5440B Direct Voltage Calibrator DCV Equivalent
Fluke 5450B Resistance Calibration Ohms Equivalent
Fluke 5200A Precision Alternating Volt-
age Calibrator
ACV Less precise
Datron 4808 Multifunction Calibrator
(Options 10, 20, 30, 40, 50)
DCV, ACV, DCI, ACI,
Ohms
Similar
To Next Page
Loading...
Need help?
General
