2-8 Return to Section Topics 2600AS-900-01 Rev. B / September 2008
Section 2: Remote Operation Series 2600A System SourceMeter® Instruments User’s Manual
Figure 2-5
LAN connection
Step 5: Access the instrument's internal web page
1. Open a web browser on the host PC.
2. Enter the instrument’s IP address in the browser's address box. For example, if the
instrument's IP address is 192.168.0.3, enter 192.168.0.3 in the browser's address box.
3. Press ENTER on the PC keyboard to open the instrument’s web page.
Working with the web interface
The Series 2600A has a web interface (see Figure 2-6) that you can use to remotely access the following:
• Connection string
• LXI class
• Firmware version number
• MAC address
• Instrument model
• Connection string
• Virtual front panel
• TSB embedded
• TSP Express
WARNING:
NO INTERNAL OPERATOR SERVICABLE PARTS,SERVICE BY QUALIFIED PERSONNEL ONLY.
WARNING:
NO INTERNAL OPERATOR SERVICABLE PARTS,SERVICE BY QUALIFIED PERSONNEL ONLY.
CAUTION:
FOR CONTINUED PROTECTION AGAINST FIRE HAZARD,REPLACE FUSE WITH SAME TYPE AND RATING.
CAUTION:
FOR CONTINUED PROTECTION AGAINST FIRE HAZARD,REPLACE FUSE WITH SAME TYPE AND RATING.
MADE IN
U.S.A.
IEEE-488
LINE RATING
100-240VAC
50, 60Hz
240VA MAX.
DIGITAL I/O
RS-232
LINE FUSE
SLOWBLOW
3.15A, 250V
TSP-Link
R
SENSE
LO LO HI
CHANNEL A
SENSE
HI
GUARD
A LO
LAN
NO AUTO-MDIX
SENSE
LO
LOHI
CHANNEL B
SENSE
HI
GUARD
!
Model 2636A
LAN connection port
To Next Page
Loading...
Need help?
General
