Model 2701 Instrument Networking Instruction Manual Network Connection 2-7
Figure 2-3
Dual NIC to Model 2701
Table 2-4
Additional component requirements—dual NIC connection through hub
Quantity Component Note
2 Network Interface Card Properly installed in PC.
Existing Existing network cabling Maintains current network functions.
2 CAT 5 straight-thru cable Add one additional cable for each additional
Model 2701 connected through the hub.
1 Network Hub 10/100BaseTX
Building Network
Connection through hub
Building Network
Direct connection
Cross over cable
Straight through cable
Straight through cable
Hub
Increased security
using dual NICs
in computer
To Next Page
Loading...
Need help?
General
