CleaningtheMachine
To insure that your machine operates at _ts best, you need to keep the essentlar parts clean at all times.
Unplug the machine and remove the presser foot and needle,
Remove the cover plate by sliding the hook cover plate release
button to the right.
Take out the bobbin.
Brush out dust and ]int. {You may atso use a vacuum cleaner.)
Clean the feed dogs, hook race and bobbin holder with the lint
brush and a soft dry cloth.
Remove the set screw on the left hand side of the needle plate
with the screwdriver supplied with the machine.
Remove the needle plate,
Take out the bobbin. Lift up the bobbin holder and remove it.
Insert the bobbin holder so that the knob fits next to the
stopper in the hook race.
Attach needle plate with screw,
99
To Next Page
Loading...
Need help?
General
