e Darning Small Rips
U_ULi
Small rips can be repaired by programming
the machine to sew a shorter darn.
Begin the first row of the darn stopping the
machine when you reach the bottom edge of
the rtp. For example, you may on|y need to
sew 5 stitches. Press the reverse button but
do not hold it. The machine will now
complete the 16 rows with 5 stitches }n each
row and stop automatically.
It is simple to make a darning of same size as
the first one.
Press memory button when you have
completed the first darning.
Depress the foot control. For a second
darning of the same size.
Pressing mirror image button instead of
memory button will give the same result but
the darning is made in the reverse sequence.
= Adjusting Evenness of Darning
[29 I d3!
%
J_
When the left side When the right side
is _ower Select dl or d2 to is _ower.
give an even stitch,
129 m d21
Select d4 or dSte
give an even stitch.
ff there _s a difference m height between the starting point (left side) and the end
point (right side) of darning, make adjustment by pressing the C_ or C_3 button,
Press _ button, and adjust between dl and dS.
Upon pressing the _ button the selection is displayed on the screen.
To Next Page
Loading...
Need help?
General
