Kenwood DM-SG7 User Manual

DM-SG7(EN)
34
Editing
1
Select the “Q.MOVE”.
Moving several tracks at a time
(QUICK MOVE)
Use the following procedure to change the cur-
rent order of tracks by selecting a desired order
and moving the tracks together. (up to 255 tracks)
Preparation
¶Enter the stop mode.
2
Select the track you want to move.
1 Select a track number.
2 Set it.
7
4¢
To decrease
track No.
To increase
track No.
SET
3 Repeat steps 1 and 2 above.
¶ Pressing the 1 ¡ key allows to check the current
order of tracks.
¶ Pressing the CLEAR/DELETE key allows to cancel the
last selected track only. (To erase previously selected
tracks, press the EDIT key and restart from the begin-
ning.)
( − dB)
MANUAL
 0
03 0
4
? ?
R
L
∞
3 0130
10
5
/
0
=
>
( − dB)
MANUAL
 Q
.MOV
E
?
R
L
∞
3 0130
10
5
( − dB)
MANUAL
 0
01/
0
0
1
?
R
L
∞
3 0130
10
5
=
>
Track No. to be moved
Selected track No.
2 Select the “Q.MOVE”.
3 Set it.
4¢
: Keys and control used in the op-
erations described on this page.
1 Press the EDIT key .
EDIT
SET
¶ Editing is aborted if no operation has been performed for
8 seconds.
Each press of the 4 ¢ keys switches the operation.
1 Q.MOVE
2 Q.ERASE
4 End the selection of the group to be moved.
ENTER
CURSOR/CHECK

Kenwood DM-SG7 Specifications

System and Audio

system	Minidisc digital audio system
laser	Semiconductor laser
recording method	Field modulation overwrite method
audio compression	ATRAC (Adaptive TRansform Acoustic Coding)
playing rotation	Approx. 400 rpm ~ 900 rpm (CLV)
D/A conversion	1 Bit
oversampling	128 fs (5644.8 kHz)
A/D conversion method	Sigma-delta method
sampling frequency	44.1 kHz

Digital Audio Performance

frequency response (playback mode)	8 Hz ~ 20 kHz, ± 1 dB
signal to noise ratio (playback mode)	More than 92 dB
dynamic range (playback mode)	More than 90 dB
total harmonic distortion (1 kHz, playback mode)	Less than 0.007 %
channel separation (1 kHz, playback mode)	More than 85 dB
wow & flutter	Less than unmeasurable limit

Inputs and Outputs

analog input sensitivity / input impedance	300 mV / 70 kΩ
analog output level / load impedance	1.2 V / 3.2 kΩ
digital input, optical (wave length 660 nm)	- 15 dBm ~ - 21 dBm

General Specifications

power consumption	14 W
dimensions (width)	200 mm (7 - 7 / 8")
dimensions (height)	77 mm (3 - 1 / 16")
dimensions (depth)	247 mm (9 - 3 / 4")
weight (net)	2.1 kg (4.6 lb)