Kenwood DM-SG7 User Manual

DM-SG7(EN)
38
Editing
1
Play the title to be combined.
Use the following procedure to combine two
tracks into one by deleting a track number. This
operation allows to connect several tracks or a
piece of music divided into several parts. After
this operation, the track numbers of tracks lo-
cated after the combined tracks are decreased
automatically.
3
For combining with a different title
1 Select the track number.
2 Set it.
Combining tracks during playback
(TRACK COMBINE)
When the title being played is to be com-
bined with the next title, press the ENTER
key and then go to step 4.
2 Select “COMBINE”.
3 Set it.
EDIT
4¢
To decrease
track No.
To increase
track No.
SET
Connecting tracks 2 and 5.
( − dB)
MANUAL
 o
k?
R
L
∞
3 0130
10
5
( − dB)
MANUAL
 0
02+
0
0
5
?
R
L
∞
3 0130
10
5
¶ Editing is aborted if no operation has been performed for
8 seconds.
( − dB)
MANUAL
 C
OMB
N
E?I -
R
L
∞
3 0130
10
5
1 DIVIDE?
2 COMBINE?
3 ERASE?
4 MOVE?
SET
: Keys and control used in the operations de-
scribed on this page.
2
Select “COMBINE”.
1 Press the EDIT key
4¢
¶ If the operation is started during playback, it pauses
automatically.
Each press switches the operation.
(−dB)
MANUAL
 0
02+
0
?30
R
L
∞
3 0130
10
5
Present title Next title

Kenwood DM-SG7 Specifications

System and Audio

system	Minidisc digital audio system
laser	Semiconductor laser
recording method	Field modulation overwrite method
audio compression	ATRAC (Adaptive TRansform Acoustic Coding)
playing rotation	Approx. 400 rpm ~ 900 rpm (CLV)
D/A conversion	1 Bit
oversampling	128 fs (5644.8 kHz)
A/D conversion method	Sigma-delta method
sampling frequency	44.1 kHz

Digital Audio Performance

frequency response (playback mode)	8 Hz ~ 20 kHz, ± 1 dB
signal to noise ratio (playback mode)	More than 92 dB
dynamic range (playback mode)	More than 90 dB
total harmonic distortion (1 kHz, playback mode)	Less than 0.007 %
channel separation (1 kHz, playback mode)	More than 85 dB
wow & flutter	Less than unmeasurable limit

Inputs and Outputs

analog input sensitivity / input impedance	300 mV / 70 kΩ
analog output level / load impedance	1.2 V / 3.2 kΩ
digital input, optical (wave length 660 nm)	- 15 dBm ~ - 21 dBm

General Specifications

power consumption	14 W
dimensions (width)	200 mm (7 - 7 / 8")
dimensions (height)	77 mm (3 - 1 / 16")
dimensions (depth)	247 mm (9 - 3 / 4")
weight (net)	2.1 kg (4.6 lb)