DAB
56
DAB Setup
You can set Digital Radio related parameters.
1
Touch [ ] on the left side of the screen.
Touch [SETUP].
DAB SETUP screen appears.
2
Set each function as follows.
■ [Priority]
If the same service is provided by Digital
Radio during Radio Data System reception,
automatically switches to Digital Radio. If
the same service is provided by Radio Data
System when reception of the service being
provided by Digital Radio becomes poor,
automatically switches to Radio Data System.
■ [PTY Watch]
If the service of the set program type begins
with the ensemble being received, switches
from any source to Digital Radio for service
reception.
■ [Announcement Select]
Switches to the set Announcement service.
For details, see Announcement setup
(P.56).
■ [Antenna Power]
Sets power supply to the Digital Radio
antenna. Set to “ON” when the Digital Radio
antenna in use is equipped with a booster.
Default is “ON”.
■ [Related Service]
When you select ON, the unit switches to a
related service (if exists) when a DAB service
network is not available.
Default is "OFF".
■ [Language Select]
Selects a display language for the PTY
function.
Ñ Announcement setup
When the service for which ON is selected
starts, switches from any source to
Announcement to receive it.
1
Touch [Announcement Select] on the
DAB SETUP screen.
The Announcement Select screen
appears.
2
Touch each Announcement list and set
on or off.
■ [Select All]
Turn on the all announcements.
■ [Deselect All]
Turn off the all announcements.
NOTE
• The volume setting during reception of
Announcement service is automatically stored.
The next time the Announcement service is
received, this unit recalls the volume setting
automatically.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
