TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2011 99
17.3 Technical specification
“Sample–ion source”
distance
Ca. 5–40 cm
Ozone concentration 0~0.05 ppm (2 cm to the ion source)
Weight 525 g
Dimensions [cm] 110 × 105 × 60
Ambient conditions 0–50°C, air humidity 20–80% (non-condensing)
Power supply
input voltage
100–240 VAC; 50/60 Hz
Ionizing unit
input voltage
12 VDC, 500 mA
Contamination degree 2
Overvoltage category Category II
Installation height
above sea level
up to 2000 m
Location site Solely indoors
17.4 Device overview
Keyboard overview
1 Active ion source (Continuous Mode)
(automatic switch off after 8 h)
2 Active ion source (Time Mode)
(2-minute operation mode)
To switch between the operation modes, press one of the two buttons.
To Next Page
Loading...
Need help?
General
