KERN CFS 300-3 User Manual

40 CFS/CCS-BA-e-1624
 Determine the average piece weight (see chap. 10.1 or 10.2), place the
weighing goods and check using the tolerance mark

, if the number of the
placed pieces is under, within or above the specified tolerance.
Display of tolerance mark

, if weighing goods are under the specified tolerance:
Display of tolerance mark

, if weighing goods within the specified tolerance:
Display of tolerance mark

, if weighing goods above the specified tolerance:

For tolerance control, also only one limit value can be set.
 If both limit values are deleted, the tolerance control is deactivated.
 Delete limit values:
When inputting the upper and lower threshold press and confirm with
the TARE-key.

KERN CFS 300-3 Specifications

General

Brand	KERN
Model	CFS 300-3
Category	Scales
Language	English