CFS/CCS-BA-e-1624 11
2.2 Counting systems KERN CCS
In factory the counting system KERN CCS is preconfigured in a way that no
more changes will be necessary.
Bulk material balance KERN KFP
Reference balance KERN CFS
2.3 Counting systems with your selected bulk scales
When attaching a bulk scales (not pre-adjusted by KERN), the following must
be complied with:
Connect bulk scales with a suitable cable via the second-balance
interface. Interface connection allocation cf. chapter 16
Adjustment of bulk scales, cf. chapter 13
Adjustment / linearisation of bulk scales, cf. chapter 14 / 15
Example 1: High-load bulk scales
Reference balance KERN CFS
To Next Page
Loading...
Need help?
General
