50 CFS/CCS-BA-e-1624
12 Menu
The menu is structured in the following menu blocks.
1.
Balance settings
2.
Settings serial interface
3.
Input/display user identification number
4.
Input/display scale identification number
5.
Configuration of bulk scale
12.1 Navigation in the menu
Call up menu
Switch-on balance and during the selftest press .
The first menu block is displayed.
Select menu block
With or (model CFS 50K-3) the separate menu
items can be accessed in succession.
Select menu item Confirm selected menu block with TARE. The first menu
item is displayed, e.g.
With or (model CFS 50K-3) the separate menu
items can be accessed in succession.
Select setting Confirm selected menu point with TARE. The current
setting will be displayed.
Change settings
With or (model CFS 50K-3) switch over to the
Acknowledge setting /
exit the menu
Press , balance will return to submenu
Either make further adjustments in the menu or return to
the menu with or (model CFS 50K-3).
Return to weighing
mode
Press or (model CFS 50K-3) again
To Next Page
Loading...
Need help?
General
