KERN PBJ 620-3NM User Manual

PBS/PBJ-BA-e-1718 72
17.4.3 Format
Specify the format of data output by the balance.
For the standard format of the KERN electronic balances
• Select menu element 77 .
For the old data output format of the KERN electronic balances:
• Select menu element 78 .
17.4.4 Speed of communication
Specify the transmission speed (300, 600, 1200, 2400, 4800, 9600, 19200 or
38400 bps).
The value presented as „b-xxx” gives the number of bps (bits/second). Baud-rate
and bps are the same value.
Select one of the menu elements from 81 to 88.
17.4.5 Parity / Bit length
Select the parity and bit length.
No parity, 8-bit length:
Select the menu element 89
Odd parity, 7-bit length:
Select the menu element 90
Straight parity, 7-bit length:
Select the menu element 91
17.4.6 Stop Bits
Select the number of stop bits.
Stop bit 1:
Select the menu element 92
Stop bit 2:
Select the menu element 93
17.4.7 Limiter
The „limiter” is used to separate single data or commands from each other. The
limiter is to be set in the following way:
Setting to CR(0DH):
Select the menu element 94
Setting to LF(0AH):
Select the menu element 95
Setting to CR+LF(0D0AH):
Select the menu element 96

KERN PBJ 620-3NM Specifications

General

Brand	KERN
Model	PBJ 620-3NM
Category	Scales
Language	English