129
4
4
Features of your vehicle Lighting
Traffic Change (For Europe)
The low beam light distribution is
asymmetric. If you go abroad to a
country with opposite traffic direc
-
tion, this asymmetric part will daz
-
zle oncoming car driver. To prevent
dazzle, ECE regulation demand sev
-
eral technical solutions (ex. auto
-
matic change system, adhesive
sheet, down aiming). This head
-
lamps are designed not to dazzle
opposite drivers. So, you need not
change your headlamps in a country
with opposite traffic direction.
Lighting control
The light switch has a headlight and
a position lamp position.
To operate the lights, turn the knob
at the end of the control lever to
one of the following positions:
1. OFF position
2. Auto light position
3. Position & Tail lamp
4. Headlight position
Position & Tail lamp
When the light switch is in the posi
-
tion lamp position, the front position
lamp, taillamp, and the license plate
lamp will turn ON.
Head light (Low Beam)
When the light switch is in the head
light position, head light (low beam),
tail, license light will turn ON.
The ignition switch or ENGINE
START/STOP button must be in the
To Next Page
Loading...
Need help?
General
