141
5
5
Driving your vehicle Blind-Spot Collision-Avoidance Assist (BCA)
Warning volume
With the ENGINE START/STOP but
-
ton in the ON position, select 'Driver
Assistance → Warning Volume' from
the Settings menu to change the
Warning Volume to 'High', 'Medium',
'Low' or 'Off' for Blind-Spot Safety
system.
However, when Warning Volume is
turned off, the steering wheel
vibration function will turn on if it
was turned off.
If you change the Warning Volume,
the warning volume of other Driver
Assistance systems may change.
䳜 The setting of the Warning Timing
and Warning Volume applies to all
functions of the Blind-Spot
Safety system.
䳜 Even though 'Normal' is selected
for Warning Timing, if the vehicles
approaches at high speed, the ini
-
tial warning activation time may
seem late.
䳜 Select 'Late' for Warning Timing
when traffic is light and when
driving speed is slow.
Function operation
Function warning and control
Vehicle detection
䳜 To warn the driver a vehicle is
detected, the warning light on the
side view mirror and head-up dis
-
play (if equipped) will illuminate.
䳜 The function will operate when
your vehicle speed is above 20
km/h (12 mph) and the speed of
the vehicle in the blind spot area is
above 10 km/h (7 mph).
Collision warning
䳜 Collision warning will operate
when the turn signal is turned on
in the direction of the detected
vehicle.
䳜 If 'Warning Only' is selected from
the Settings menu, the collision
To Next Page
Loading...
Need help?
General
