133
4
4
Features of your vehicle Lighting
High Beam Assist (HBA) (if
equipped)
High Beam Assist is a function that
automatically adjusts the headlamp
range (switches between high beam
and low beam) depending on the
brightness of detected vehicles and
certain road conditions.
Detecting sensor
Front view camera
The front view camera is used as a
detecting sensor to detect ambient
light and brightness whilst driving.
Refer to the picture above for the
detailed location of the detecting
sensor.
䳜 Always keep the front view cam
-
era in good condition to maintain
optimal performance of High
Beam Assist.
䳜 For more details on the precau
-
tions of the front view camera,
refer to"Forward Collision-Avoid
-
ance Assist (FCA) (Front view
camera only) (if equipped)" on
page 6-62.
Function setting
With the ENGINE START/STOP but
-
ton in the ON position, select 'Lights
→ High Beam Assist (or HBA (High
Beam Assist))' from the Settings
menu to turn on High Beam Assist
function.
For your safety, change the Set
-
tings after parking the vehicle at a
safe location.
Function operation
䳜 After selecting 'High Beam Assist'
in the Settings menu, High Beam
Assist will operate by following
the procedure below.
- Place the headlamp switch in
the AUTO position and push the
To Next Page
Loading...
Need help?
General
