Features of your vehicle
1344
Lighting
headlamp lever towards the
instrument cluster. The High
Beam Assist ( ) indicator light
will illuminate on the cluster
and the system will be enabled.
- When the system is enabled,
high beam will turn on when
vehicle speed is above 40 km/h
(25 mph). When vehicle speed is
below 25 km/h (15 mph), high
beam will not turn on.
- The High Beam ( ) indicator
light will illuminate on the clus
-
ter when high beam is on.
䳜 When High Beam Assist is operat
-
ing, if the headlamp lever or
switch is used, the function oper
-
ates as follow:
- If the headlamp lever is pulled
towards you when the high
beam is off, the high beam will
turn on without High Beam
Assist cancelled. When you let
go of the headlamp lever, the
lever will move to the middle
and the high beam will turn off.
- If you push the light switch
towards the instrument cluster,
high beam is turned on and High
Beam Assist is released.
- If the headlamp switch is placed
from AUTO to another position
(headlamp/position/off), High
Beam Assist will turn off and
the corresponding lamp will
turn on.
䳜 When High Beam Assist is operat
-
ing, high beam switches to low
beam if any of the following con
-
ditions occur:
- When the headlamp of an
oncoming vehicle is detected.
- When the tail lamp of a vehicle
in front is detected.
- When the headlamp or tail lamp
of a motorcycle or a bicycle is
detected.
- When the surrounding ambient
light is bright enough that high
beams are not required.
- When streetlights or other
lights are detected.
Malfunction and limitations
Malfunction
When High Beam Assist is not work
-
ing properly, the 'Check High Beam
Assist (HBA) system' warning mes
-
sage will appear and warning light
( ) will illuminate on the cluster.
We recommend that you have your
To Next Page
Loading...
Need help?
General
